shop by category

Home

left banner

DIY Tap Handle Inserts - Dual Threaded - 3/8″-16 threads
  • DIY Tap Handle Inserts - Dual Threaded - 3/8″-16 threads
  • DIY Tap Handle Inserts - Dual Threaded - 3/8″-16 threads

DIY Tap Handle Inserts - Dual Threaded - 3/8″-16 threads

£4.56

£3.80 tax excl.

Want to make your own unique tap handles? But the thread type is strange and overseas prices are just $$$! KegLand now has the answer with these simplistic brass inserts.

All you'll need is a 12.7mm (1/2") Hole drilled into your handle (Pine, Red Gum, Oak, Cherry, Maple etc.) Then screw in with a large flat screw driver.

Quantity

 

100% Secure Payment Processing

 

Most orders processed within next working day

 

30 day return policy for unused items

DIY Beer Tap Handle Inserts - Dual Threaded - 3/8″-16 threads, .625″ Length

Want to make your own unique tap handles? But the thread type is strange and overseas prices are just $$$! KegLand now has the answer with these simplistic brass inserts.

All you'll need is a 12.7mm (1/2") Hole drilled into your handle (Pine, Red Gum, Oak, Cherry, Maple etc.) Then screw in with a large flat screw driver.

It is important not to push down too hard if you're going to using a screw driver, or wide drill bit. It will strip the thread. Let the piece cut into the wood. Ensure that it is straight.

HNDLINSERT

Data sheet

Brand
KegLand
MPN
KL13383

Specific References

banner

offer

banner