shop by category


left banner

16mm Q-Max Metal Punch
  • 16mm Q-Max Metal Punch

16mm Q-Max Metal Punch


£9.10 tax excl.

Q.Max Sheet Metal Punch - 16mm

Requires 6mm Hex Key, 8mm bolt hole

Last items in stock


100% Secure Payment Processing


Most orders processed within next working day


30 day return policy for unused items

A quick and easy way to cut clean imperial sized holes in sheet metal.

The special design allows even load during cutting and produces a burr free hole that needs no extra finishing.

Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

All punches boxed singly without key, which should be ordered separately (Key Type. 8mm hexagonal wrench)

To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

Requires 6mm Hex Key8mm bolt hole.  Recomend drilling a smaller pilot hole before drilling the 8mm hole for the Q-Max bolt with a 4mm drill bit

Using Q-Max cutter guide


Data sheet


Specific References