240V Magnetically coupled pump ideal for homebrewing with separated motor (dry side) and stainless steel pump head (wet side).
Magnetically driven pumps have no shaft from the motor to the impeller so there is no bearing and seal required which can be a point of failure in other non magnetically driven pumps. This also allows flow control using a ball valve on the outlet and the pump can run when this is shut off
Note the pump is not self priming and flow control should only be applied to the output. Do not run dry
Features
- Max.Flow Rate (50/60HZ) 27 / 32 Litres/Min
- Max. Head (50/60HZ) 3.1 / 4.3 Meters
- Magnetically coupled so outlet Stainless Steel (SS304) Pump Head
- 1/2" BSP threaded inlet and outlet
- Temperature range 0-120C (32F-248F)
- Voltage 220/240V AC at 50/60 Hz
- UK 3 Pin Plug Fitted