The BrewDevil is an All-in-one professional microbrewery with integrated element, powerful magnetic drive recirculation pump and advanced brewery program controller.
Ideal for making the step from kit brewing to all-grain brewing and making awesome craft beer. Note the larger 50L BrewDevil can also do smaller 23L brews. Comes with 1 year warranty
The Robobrew / Brewzilla is an All-in-one professional microbrewery with integrated element, powerful magnetic drive recirculation pump and advanced brewery program controller.
Ideal for making the step from kit brewing to all-grain brewing and making awesome craft beer. Comes with 1 year warranty
We have been converting pots into homebrew vessels since we first started in 2013 and the range of taps and fittings has grown to meet requirements for HLTs, mash tuns and boil kettles custom built to customer requirements
Many of our stainless steel fittings come from a UK stainless steel fittings supplier who are experts in their field and have very high quality standards
If you don't find what you are looking for, get in touch and we can probably get it for you
With a focus on quality reliable pumps, a good offering of pumps used in homebrewing applications whether looking for 240 AC or DC pumps
All the pumps are magnetic drive so have high reliability and no need for a seal between the wet side pump head and dry side pump motor. This is a common point of failure of shaft drive pumps which is not an issue for the more reliable magnetic drive pumps
High quality hose and typical fittings for pump connection also included in this category
Fermentation vessels and fermentation related products. Stainless Steel BrewDevil conical fermenter, Fermzilla pressure rated conical unitank and accessories and spares
This all new ball lock disconnect sets a new bar! The integrated duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze!
The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassemble and clean.
The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured.
The humble plastic ball lock disconnects have been around a long time and are used by thousands of home brewers around the world. Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. As a result we have come out with the new duotight ball lock disconnect.
Some of the features include:
duotight push in
These duotight ball lock disconnects already have the duotight fitting built into the ball lock disconnect. No need for additional threaded fittings. Simply push the beer/gas line in and you are done!
Compact
The worlds most compact ball lock disconnect every manufactured. This new compact form factor is great for tight spaces or fridges where you want to pack as many kegs in as possible. This is the only ball lock disconnect that allows standard ball lock kegs to be double stacked while still connected to beer and gas lines.
Overmoulded Poppet
The overmoulded poppet design means you can couple and disconnect this ball lock disconnect under extreme pressures of 150psi and will never have issues with the O-ring blowing out.
Tool-less Disassembly
Other ball lock disconnects require a tool such as a flat head screw driver or spanner to take them apart for cleaning. The new caps on these allow for easy disassembly by hand, making these easier to break down for cleaning. It's literally never been easier to remove hop particles from your ball lock disconnects.
Extreme Chemical Resistance
No cheap ABS plastic or nitrile seals. This ball lock disconnect is made from stainless spring and ball bearings, with an engineering polykeytone resin body, EPDM and PP/EPDM overmoulded poppet. This makes this ball lock disconnect resistant to extreme chemicals such as phosphoric and acetic acid, caustic soda, peroxide and many other acid or base chemicals which are commonly used in homebrewing.
Toughness
This ball lock disconnect is more robust than any other plastic ball lock disconnect ever manufactured due to the use of new engineering plastics. Don't be fooled by the small form factor - these bad boys are tough!
High Flow
The internal design of these allows for faster flow meaning you can slightly quicker transfers when compared to other plastic ball lock disconnects.
This all new ball lock disconnect sets a new bar! The integrated duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze!
The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassemble and clean.
The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured.
