All Dispensing Products
Hombrew Canning, growlers, Intertap products, faucets and shanks, Beer line and other dispensing fittings and accessories
-
Pin Valve (with Piercing Pin)
£14.00 £11.67 tax excl.Pin valve is for use with pressure barrels. Includes piercing pin. A bulb holder is required...
-
O-Ring Seal Gasket for Pin Valve or S30 Valve
£1.20 £1.00 tax excl.Replacement Pin Valve or S30 Valve O-Ring Seal Gasket. This is the seal used on the valve...
-
Complete Float Set for King Keg Barrel Tap
£6.90 £5.75 tax excl.Complete Float Set for King Keg Barrel Tap. These ensure the clearer beer is picked up from...
-
Stick-on Thermometer Strip
£1.90 £1.58 tax excl.Stick to your plastic fermenter bucket to read the approximate temperature of your...
-
NukaTap Mini Flow Control Ball Lock Setup
£30.00 £25.00 tax excl.Complete Nukatap Mini Ball Lock Setup with Flow Control Ball Lock connector. Nukatap Mini the...
-
4" King Keg Caps with S30 and O-Ring
£16.00 £13.33 tax excl.Replacement cap for King Keg pressure barrel, fitted with a S30 valve to accept the S30 gas...
-
NukaTap-FC-Gen2 Retrofit Upgrade Kit
£4.00 £3.33 tax excl.Generation 2 Flow Control Mechanism for the NukaTap FC upgrade kit. This replaces part numbers...
-
NukaTap Mini Ball Lock Setup
£26.00 £21.67 tax excl.Complete Nukatap Mini Ball Lock Setup with Ball Lock connector. Nukatap Mini the tap that...
-
5/8" BSP to Gas Ball Lock Post Adaptor (Keg Connector Adaptor)
£8.50 £7.08 tax excl.If you are using any 50L Keg coupler (A-Type, D-Type etc.) and want to be versatile in what...
-
5/8" BSP to Liquid Ball Lock Post Adaptor (Keg Connector Adaptor)
£8.50 £7.08 tax excl.If you are using any 50L Keg coupler (A-Type, D-Type etc.) and want to be versatile in what...
-
JG 3/8" Shut-Off Valve (Short Handle)
£11.90 £9.92 tax excl.John Guest 3/8" Shut-Off Valve (Short Handle). A quick and easy way of incorporating a shut...
-
JG 3/8" Stem to 3/16" Tube Push Fit Straight Reducer
£1.94 £1.62 tax excl.John Guest 3/8" Stem to 3/16" Tube Push Fit Straight Reducer. Quickly and easily reduces the...
-
JG 3/4” BSP Female Adaptor Flat End to 3/8" Push Fit
£4.80 £4.00 tax excl.JG 3/4” BSP Female Adaptor to 3/8" Push Fit. Quickly and securely converts a push-fit...
-
Monotight 6.35mm (1/4) Female x 6.35mm (1/4”) Female One Way Check Valve (Gas/Water)
£3.90 £3.25 tax excl.This very handy fitting could save you your regulator and is a good investment. This...
-
Duotight 6.35mm (1/4") Gas Ball Lock Disconnect
£6.00 £5.00 tax excl.This all new ball lock disconnect sets a new bar! The integrated duotight design means you can...
-
Replacement Seal Kit - duotight 8mm (5/16') FC Ball lock disconnect
£3.60 £3.00 tax excl.Replacement Seal Kit - duotight 8mm (5/16') FC Ball lock disconnect. Please refer to the...
-
2m Power Lead for Cannular Canning Machine, MaltZilla or Benchy Carbon (40amp Anderson Plug x Alligator Clips
£27.00 £22.50 tax excl.This handy power lead is perfect so you can power up your Benchy Carbon, Cannular Canning...
-
Ball Lock Multi-Post for Power Sprayer (Incl. Poppet & Spring)
£4.80 £4.00 tax excl.This part is only suitable for the KL40860 1L Power Sprayer (Rechargeable USB Type-C). It is...
-
NukaTap Mini Nitro Stout Spout
£12.00 £10.00 tax excl.Get more out of your NukaTap Mini set up with the Nitro Stout Spout. Portable Guinness or...
-
4 Tap T-Bar Brushed Stainless Font Kit (duotights, shanks, handles, EVABarrier)
£159.00 £132.50 tax excl.4 Tap T-Bar Brushed Stainless Font Kit (duotights, shanks, handles, EVABarrier). If you're...
