We have been converting pots into homebrew vessels since we first started in 2013 and the range of taps and fittings has grown to meet requirements for HLTs, mash tuns and boil kettles custom built to customer requirements
Many of our stainless steel fittings come from a UK stainless steel fittings supplier who are experts in their field and have very high quality standards
If you don't find what you are looking for, get in touch and we can probably get it for you
With a focus on quality reliable pumps, a good offering of pumps used in homebrewing applications whether looking for 240 AC or DC pumps
All the pumps are magnetic drive so have high reliability and no need for a seal between the wet side pump head and dry side pump motor. This is a common point of failure of shaft drive pumps which is not an issue for the more reliable magnetic drive pumps
High quality hose and typical fittings for pump connection also included in this category
IceMaster G40.1 - Glycol Chiller / IceBank- Digital Control
£810.83 tax excl.
Commercial grade compact chilling dispensing solution. The G40 offers high performance for small to medium volume customers. Suits small bars, cafés, restaurants or even the increasingly popular travelling bars who want to ice up their flooded fonts.
Please note this is for the unit only, it does not come with attachments for the lines such as compression fittings, tubing for product and chilling lines, or polypropylene glycol.
IceMaster G40 - Glycol Chiller / IceBank- Digital Control
Commercial grade compact chilling dispensing solution. The G40.1 offers high performance for small to medium volume customers. Suits to small bars, cafés, restaurants or even the increasingly popular travelling bars.
It is also not uncommon for some craft brewers to use this device to control the fermentation temperature of their vessels, providing they have a thick insulated jacket. We would not recommend this product for over 500L capacity vessels.
Comes with flooding impeller pump as standard, all enclosed inside the unit for efficiency and ease in transport. The G40 is also completely enclosed including the removable lid, this will aid in cooling performance due to less heat loss.
8mm 304 Stainless tubing ideal for compression fittings to 6mm barbs for product lines located at the side of the unit making them easier to install under commercial bar tops where height restriction is limited. The barbs are natively duotight compatible as well, for easy installation with our 5/16 beer line suited to be used for a glycol system, but can be used as an icebank.
We would like to make clear that with one pass through, through the G40.1 will only be able to drop the temperature of your product by 15C. Hence we highly recommend if you are dispensing in an area that will be over 30C, that you use the G40.1 only for two product lines, and double them up through the unit. e.g. passes through the chiller twice in a loop.
The G40 inlet and outlet barbs are duotight/john guest compatible. We recommended 5/16" push fit joiners or 5/16" push fit elbows for this - many people find the elbows allow for easier installation. Our 5/16mm beer line is generally the correct diameter for beer line.
For setting up a flooded font, you will also need some heavy duty silicone and clamps.
Unless you are using this as an icebank, you will also need some propylene glycol.