left banner

230V Chugger Center Inlet Brew Pump (CPSS-CI-2)
  • 230V Chugger Center Inlet Brew Pump (CPSS-CI-2)
  • 230V Chugger Center Inlet Brew Pump (CPSS-CI-2)
  • 230V Chugger Center Inlet Brew Pump (CPSS-CI-2)
  • 230V Chugger Center Inlet Brew Pump (CPSS-CI-2)

230V Chugger Center Inlet Brew Pump (CPSS-CI-2)

£166.00

£138.33 tax excl.

230V Chugger center inlet magnetic drive brew pump with base and stainless steel head (Model CPSS-CI-2) 

Quantity
There are not enough products in stock

 

100% Secure Payment Processing

 

Most orders processed within next working day

 

30 day return policy for unused items

  • Review Rating 4.7
  • Review Count 5
  • Max Flow Rate (L/min) 22.7
  • Max Water Head (M) 4.1

The 230V  Chugger Stainless Steel center inlet Pump is a homebrew beer pump which is typically used to transfer hot and/or cold liquids between brewing vessels.   

Please note the pumps do not come with plugs fitted.  Wires are US colours: Live = Black (UK Brown), Neutral = White (UK Blue), Earth = Green (UK Green and Yellow Stripe)

BSP Fitting will fit the NPT Tapered threads on the inlet and outlet.  Use a  "3/4" to 1/2" BSP Reducing Socket" if wanting to reduce the 3/4" centre inlet down to 1/2" BSP.

Chugger pumps are made specificly by brewers for brewers.  Comparable to the popular March pumps in virtually every way except Chugger pumps feature a 25% more powerful motor (1/20HP instead of 1/25hp) and of course Stainless steel heads.  Another benefit is that the Chugger heads are interchangable with existing March brand pump motors. 

The pump is hugely popular and widely adopted in the US and now available here as a European voltage version with CE certification.  More information and full manual available here on the Chugger website

Centrifugal magnetic drive pumps are not self priming. DO NOT RUN DRY, the pump head must be full of liquid before switching on the pump.

Generlal Specification

  • Model: CPSS-CI-2 
  • Inlet 3/4" MPT Outlet 1/2" MPT ( BSP fittings will fit the MPT Tapered threads on the inlet and outlet )
  • 316 STAINLESS STEEL (Front Housing), 316 Stainless Steel (Rear Housing), Teflon (Thrust Washer), CLEAR Silicone (O-Ring), Ryton/Teflon Impeller
  • Max Flow  22.7 LPM (7 GPM)
  • Max Head 4.1 M (18.6 FT)
  • Power 1/20 HP (.04 HP) .029 KW
  • Electrical 230V 50/60HZ
  • Non-Submersible
  • Motor AMP Rating - Full Load Amps (FLA)
  • Motor Only: 1.7 Amps
  • Motor and Pump: 1.9 Amps
  • Approx 140cm power cord
  • Can handle liquids of 120°C  (250°F)
  • Materials are FDA Food Compliant
  • Components are UL Recognized
 
Installation
 

Directional arrows on the pump head show fluid direction through the pump. The four screws on the pump head may be removed and the pump head can be rotated as required to fit your piping system. Please see "How to Change a Chugger Pump Orientation Video".  for instructions.

Replacement "Chugger Pump Inline Stainless Steel Pump Head (SSPH-IN)" available which can also be used to replace March pump heads (Please get in touch for details)

The motor should be oiled yearly with 4-5 drops SAE20 weight non-detergent oil, do not over oil.

Follow all local electrical safety codes and always disconnect power before performing work on or near the pump motor.

Limited Warranty

CHUGGER PUMP® is warranted only against defects in workmanship for a period of 6 months from the date of purchase. DO NOT RUN THE PUMP DRY, it will not be covered under warranty. A SQUEALING SOUND IS A WARNING YOU ARE RUNNING THE PUMP WITH NO FLUID. POWER OFF IMMEDIATELY. DO NOT PLUMB INLET TUBING OR CONNECTIONS WITH LESS THAN 1/2" FULL PORT FITTINGS. THIS WILL RESULT IN CAVITIATION AND PROBLEMS WITH YOUR PUMP

CPPS-CI-2

Data sheet

Review Rating
4.7
Review Count
5
Max Flow Rate (L/min)
22.7
Max Water Head (M)
4.1

Specific References

banner

offer

banner