All Tap & Fittings Products
All Taps and Fittings products used to build homebrew equipment including valves, tap kits, camlocks, quick disconnects, cone seat unions, washers and seals
-
M6 Stainless Steel Eye Bolt
£5.82 £4.85 tax excl.316 Stainless Steel M6 Stainless Steel Eye Bolt with nuts and washers.
-
1/2" BSP Y-Strainer Filter
£17.00 £14.17 tax excl.1/2" BSP Y-Strainer with stainless steel body, end cap and filter...
-
1/2" BSP Type A Camlock Fitting
£3.85 £3.21 tax excl.Camlock Type "A" quick disconnect 1/2" BSP SS316 stainless steel fitting
-
1/2" BSP Type B Camlock Fitting
£5.24 £4.37 tax excl.Camlock Type "B" quick disconnect 1/2" BSP SS316 stainless steel fitting. Fitted with white...
-
1/2" BSP Type C Camlock Fitting
£5.48 £4.57 tax excl.Camlock Type "C" quick disconnect 1/2" SS316 stainless steel fitting. Fitted with white high...
-
1/2" BSP Type D Camlock Fitting
£6.00 £5.00 tax excl.Camlock Type "D" quick disconnect 1/2" BSP SS316 stainless steel fitting. Fitted with white...
-
1/2" BSP Type DC Camlock Fitting
£4.85 £4.04 tax excl.Camlock Type "DC" quick disconnect 1/2" SS316 stainless steel fitting. Dust cap end fitted...
-
1/2" BSP Type E Camlock Fitting
£4.20 £3.50 tax excl.Camlock Type "E" male quick disconnect to 1/2" hose barb SS316 stainless steel fitting
-
1/2" BSP Type F Camlock Fitting
£3.95 £3.29 tax excl.Camlock Type "F" quick disconnect 1/2" BSP (Tapered) SS316 stainless steel fitting
-
1/2" NPT Type A Camlock Fitting
£3.85 £3.21 tax excl.Camlock Type "A" quick disconnect 1/2" NPT SS316 stainless steel fitting suitable for Chugger...
-
-
-
PCO Female Ball Valve (Dry Hop Device for FermZilla)
£19.00 £15.83 tax excl.This really handy stainless adaptor ball valve will enable you to connect two PCO 1881 threads...
-
2" Tri-Clover End Cap
£5.50 £4.58 tax excl.Sanitary 304 Grade Stainless Steel 2" Tri-Clover End Cap made to suit all standard 2 inch tri...
-
2" Tri-Clover Silicone Beaded Seal
£1.20 £1.00 tax excl.This is a silicon seal for use with 2inch Tri-Clover Clamps.
-
PCO1881 Male x 2 Inch Tri-Clover (POK)
£5.40 £4.50 tax excl.For all you hop bongers out there. We have an end cap for all end caps! The Polyketone 2 Inch...
-
2 Inch Tri-Clover Clamp
£7.30 £6.08 tax excl.Made from 304 stainless steel and compatible with wide range of other standard 2inch...
-
4 Inch Tri-Clover Silicone Beaded Seal
£1.80 £1.50 tax excl.Silicone seal for use with 4 inch Tri-Clover Clamps